Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Athens, AL (35613) · Local Professionals

Huntsville Metal Roofing · Fast response in Athens and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Athens sits just west of Huntsville where the cotton fields start rolling and the historic courthouse square still anchors the old downtown. The housing stock tells the story: 1800s farmhouses and barns on the edges of town, mid-century brick ranches closer in, and newer subdivisions off Highway 72. If you live in 35613, you know the weather here is hard on roofs, from summer UV to spring hail.

We are Huntsville Metal Roofing, and we have been putting metal on Athens homes and outbuildings for years. Whether you are near the Athens State University campus or out on a farm off Elkton Road, we know the local building department, the historic district rules, and what it takes to make a metal roof last in north Alabama.

Metal Roofing in Athens (35613)

Athens is where the Tennessee Valley meets the farm belt. The ground is red clay and limestone, and drainage matters. On older properties near downtown, lots are narrow with mature oaks and hickories, so we plan for tight access and careful staging. On the farm edges, barns and shops often need corrugated or R-panel roofing that can handle equipment traffic and animal housing. The historic district around the courthouse square has design review for roof profile and color, and we handle that paperwork. Newer subdivisions off Lindsay Lane and Highway 72 often have HOA rules, and we coordinate with those boards. The biggest local issue we see is wind-lifted panels and failed fasteners after spring storms, plus ice damming on the few steep pitches we get during occasional winter ice.

Our team has worked on everything from 1800s farmhouses to modern commercial buildings in Athens. We know the local inspectors and the permit thresholds, and we can tell you what will pass and what will not.

Our services in Athens

How a Job Works in Athens

Step 1: You call us at (256) 858-7133 or request a free estimate online. We schedule a time to come out and inspect your roof, attic, and flashing. We will give you a written scope and price before any work starts. For storm damage, we do free inspections and can document everything for your insurance claim.

Step 2: Once you approve, we pull the permit from the Athens Building Department if required. On historic homes near the square, we submit for design review. On tight lots, we stage materials carefully to avoid blocking neighbors. Our crew removes the old roof, inspects the decking, and installs the new metal roof with underlayment and flashing. We protect your landscaping and clean up daily.

Step 3: After installation, we do a final walkthrough with you. We magnet-sweep for nails, haul away all debris, and make sure you know how to care for your new roof. We do not leave until you are satisfied.

Metal roofing in Athens is priced by the square foot, and the final number depends on roof size, pitch, access, and whether we are going over existing shingles or doing a full tear-off. For a typical ranch home in 35613, metal roof installation starts around $8 per square foot, standing seam starts at $10, and corrugated panel starts at $5.50. A full replacement with tear-off starts around $9 per square foot. If you are retrofitting over shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for commercial and agricultural buildings. Call (256) 858-7133 to get a real number for your property.

My house is near the historic courthouse square in Athens. Can I get a metal roof that passes design review?
Yes. The Athens historic district has design guidelines for roof profile and color, and we have worked with the review board before. We can recommend panel styles and colors that meet the guidelines, and we handle the submittal. It usually adds a week or two to the schedule, but it is straightforward.
A storm just blew through Athens and lifted some panels on my barn off Elkton Road. How fast can you get out?
We prioritize storm damage calls. Call us at (256) 858-7133 and we will schedule a free inspection, usually within 24 to 48 hours depending on volume. We can tarp or secure the roof temporarily if needed, and we document everything for your insurance claim.
What does a metal roof cost for a typical three-bedroom ranch in Athens?
For a 1,500 to 2,000 square foot ranch, most metal roof installations run between $12,000 and $20,000 depending on the panel type, pitch, and whether we tear off the old shingles. Standing seam is at the higher end, corrugated at the lower. We give you a firm quote after a free on-site measurement.
Do I need a permit to replace my roof in Athens?
The City of Athens Building Department typically requires a permit for a full roof replacement, and the rules vary for re-roofs over existing shingles. We pull the permit for you and make sure the work meets local code. We always defer to the building department for final requirements.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
In Alabama, roof overhangs can cross property lines in some cases, but it is best to check with the Athens building department and your survey. If you are in an HOA, review the covenants first. We can adjust the design to stay within your line if needed.
Are you insured for work on my Athens property?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Athens?
Metal roofs are low maintenance, but in our climate you should check fasteners and seals every couple of years, especially after hail or high wind. Keep gutters clear of pine needles and leaves, and trim tree limbs away from the roof. We offer inspections and tune-ups if you want a professional to check things over.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm