Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Huntsville, AL (35805) · Local Professionals

Huntsville Metal Roofing · Fast response in Huntsville and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Huntsville's mix of 1950s brick ranches, Victorian bungalows in Five Points, and new subdivisions off Memorial Parkway means one thing for roofs: hail and tornado-season wind are the real test. If you live near Monte Sano or in the older parts of 35805, you've probably seen shingles in the yard after a spring storm.

That's why homeowners call Huntsville Metal Roofing. We replace worn asphalt with standing seam and metal shingle systems built for Alabama weather, and we repair the leaks that show up after a heavy downpour. From Twickenham to Hampton Cove, we know how these roofs fail and how to fix them right.

Metal Roofing in Huntsville (35805)

Huntsville sits in the Tennessee Valley, and the ground here is red clay over limestone. That matters for drainage: water pools fast on flat lots and runs hard off steep hips and gables. Older homes in Five Points and Blossomwood often have tight side yards and mature oaks, hickories, and pines that drop limbs and shade the roof, which keeps moisture around longer. Newer subdivisions out toward Madison and Meridianville have simple access but strict HOA rules on panel profiles and colors. On farm shops and barns toward Hazel Green and Athens, corrugated and R-panel are the norm, while copper shows up on porches and bays in the historic districts. We plan every job around the actual site: where the ladder goes, how the panels get up, and where the runoff ends up.

Our team has worked roofs across Huntsville and the surrounding areas for years. We've replaced storm-damaged shingles in Old Town, installed standing seam on ranches in 35805, and repaired leaks caused by failed fasteners and separated seams on metal roofs that were put on too fast. We know the difference between a hail bruise and a wind crease, and we document both for insurance.

Our services in Huntsville

How a Job Works in Huntsville

Step 1: You call (256) 858-7133 or send a message. We schedule a free on-site assessment, usually within a day or two. We look at the roof, the attic if accessible, the flashing, and the gutters, and we take photos. You get a written estimate with options, not pressure.

Step 2: Once you approve, we pull the roofing permit through the local building department and coordinate any historic district or HOA review. On tight lots in Five Points, we stage materials in the driveway and use a conveyor or crane if needed. We protect landscaping and walk the roof before we start. Most replacements take one to three days depending on size and weather.

Step 3: We clean up every nail with a magnet sweep, haul away old shingles, and do a final walkthrough with you. We show you the new flashing, the fasteners, and the warranty paperwork. We leave your property clean, and we don't consider the job done until you've signed off.

Pricing in Huntsville depends on the job. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're going over existing shingles, retrofit starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. The main cost factors are roof size, pitch, access, how many layers are coming off, and whether it's an emergency. Storm damage repairs start with a free inspection. Call (256) 858-7133 for a free estimate that fits your roof, not a generic number.

My 1950s brick ranch in 35805 has two layers of shingles. Can you install metal over them?
Sometimes, but it depends on the condition of the deck and local code limits on how many layers you can leave. We inspect the attic and sheathing first. If the deck is solid, a retrofit with a metal roof over shingles can save you tear-off costs. If not, we recommend a full tear-off so the new roof lasts.
A storm just peeled back panels on my barn near Hazel Green. How fast can you get out?
We prioritize storm and wind damage calls. Call (256) 858-7133 and we'll schedule a free inspection, usually within 24 to 48 hours depending on demand. We can tarp or secure the roof temporarily if rain is coming, then give you a repair estimate.
What does a standing seam metal roof cost for a typical Huntsville ranch?
Most ranches in Huntsville run between 1,500 and 2,500 square feet of roof. At our starting rate of $10 per square foot for standing seam, you're looking at roughly $15,000 to $25,000, depending on pitch, access, and whether we tear off the old roof. We give you an exact number after a free on-site measure.
Do I need a permit for a metal roof replacement in Huntsville?
Yes, a full replacement or re-roof typically requires a roofing permit, and inspection requirements vary. We handle the paperwork and coordinate with the local building department. For details on local rules, check the City of Huntsville website at https://www.huntsvilleal.gov/ or call us and we'll walk you through it.
My HOA requires a specific color. Can you match it, and what about the property line?
We can match most HOA-approved colors in standing seam and metal shingle profiles, and we'll submit samples for approval if needed. On property lines, we follow local setback rules and keep panels and fasteners on your side. If a neighbor's tree is overhanging, we'll note it before we start.
Are you insured for work on my Huntsville property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Huntsville's humidity and storm season?
Check fasteners and seams after any major hail or wind event, and keep gutters clear of pine needles and oak tassels. In Huntsville's humid summers, a coating every 10 to 15 years can extend the life of a painted panel. We offer free inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm