Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in New Hope, AL (35760) · Local Professionals

Huntsville Metal Roofing · Fast response in New Hope and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

New Hope is the kind of town where the driveway is long, the lot backs up to a hay field, and the roof over your head has probably seen a few decades of Alabama sun. Most homes here are brick ranches, farmhouses, and modest two-stories on generous pieces of land, many with mature oaks and pines that drop limbs and shade the shingles just enough to grow moss and hide trouble. If you live off Old Gurley Pike or near New Hope Elementary, you already know the wind comes across those open fields with nothing to slow it down.

That is why folks in New Hope (35760) call Huntsville Metal Roofing. We are based just down the road in Huntsville, we know the difference between a city roof and a rural one, and we show up ready to deal with real fasteners, real seams, and real weather. Whether it is a barn shop off Butler Mill Road or a family home near the high school, we treat it like it matters.

Metal Roofing in New Hope (35760)

New Hope sits in the rolling farmland of Madison County, and the work here is different from a tight subdivision lot in Huntsville. Properties are often a half acre or more, with gravel drives, detached shops, and outbuildings that need metal just as much as the house does. The ground is red clay over limestone, which means drainage matters: water that sheets off a roof has to go somewhere, and we pay attention to grade so it does not pool against a foundation or wash out a driveway. Access can be easy or tricky depending on whether your place sits back off the road, and we plan for that before we ever load materials.

Our team has worked metal roofs across Huntsville and the surrounding areas, from standing seam on a porch to corrugated panels on a working barn. In New Hope we see a lot of older roofs that have been patched more than once, and we are honest about when a repair makes sense and when replacement is the better money. We also handle the details that matter in this climate: screws that back out after a hot summer, flashing that pulls away from a chimney, and panels that lift in a straight-line wind. If you are not sure what you are looking at, we will climb up and tell you straight.

Our services in New Hope

How a Job Works in New Hope

Step 1: You call (256) 858-7133 or reach out online, and we set up a free on-site assessment. We walk the roof, check the attic if it is accessible, look at fasteners, seams, flashing, and gutters, and talk with you about what you are seeing. You get a written estimate with clear numbers, not a sales pitch.

Step 2: Once you approve, we schedule the work and pull the permits your jurisdiction requires. In New Hope that usually means a call to the local building department to confirm what is needed for a re-roof or replacement, since rules vary. If you are in an HOA or a historic review area, we help you get the panel profile and color approved before we order material. On rural lots we plan for material delivery and staging so we are not blocking your drive or a neighbor's field access.

Step 3: When the job is done, we clean up. That means magnets for screws, a sweep of the yard and gutters, and a final walkthrough with you so you can see the work and ask questions. We do not leave a mess behind, and we do not disappear after the last panel goes down.

Pricing in New Hope depends on the roof, not a flat rate. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel roofing starts around $5.50 per square foot, which is often the practical choice for a shop or barn. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing, chimney, or skylight work around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs run about $9 per linear foot. The big cost factors are roof size and pitch, how many layers are already on the roof, access and staging, and how much repair versus replacement is needed. Storm work is urgent, and we offer a free inspection and estimate so you know where you stand. Call (256) 858-7133 to get real numbers for your place.

My house is off Old Gurley Pike with a long gravel drive and a detached shop. Can you roof both the house and the shop in one visit?
Yes, and it is common here. We quote the house and the outbuilding together so you are not paying two mobilization charges, and we stage material so the drive stays usable. If the shop has corrugated panels and the house needs standing seam, we handle both profiles and explain the difference in cost and lifespan.
A storm just took off some panels and I have water coming in. How fast can you get to New Hope?
Call (256) 858-7133 and tell us it is an active leak. We prioritize storm and wind damage, and we can often get out the same day or the next to tarp or make a temporary repair so the damage stops spreading. From there we document what we find, which helps if you are filing an insurance claim, and schedule the permanent fix.
What does a typical metal roof replacement cost for a ranch house in 35760?
Most ranch homes here land somewhere in the range of a few thousand to the low five figures, depending on square footage, pitch, how many old layers have to come off, and whether there is rot or decking repair. A straightforward replacement often starts around $9 per square foot, while standing seam runs closer to $10. We give you a written estimate after we see the roof, and the number does not change unless we find something we could not see from the ground.
Do I need a permit to replace my roof in New Hope, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, but thresholds and inspection requirements vary by jurisdiction, so we confirm with the local building department before work starts. We handle the permit process for you and make sure the job is inspected as required. If your home is in a historic district or an HOA, we also help with the design review so the panel profile and color are approved first.
My neighbor's property line is close and I am worried about where the roof runoff goes. What can we do?
This comes up on smaller lots and older platted streets in New Hope. We look at where the gutters discharge and can route downspouts to a safe spot on your own property, add extensions, or adjust grading so water does not cross the line. If an HOA is involved, we help you get approval for gutter and panel changes before installation. We stay on your side of the line and keep the peace.
Are you insured for work on my property?
Yes. We are fully insured with general liability and workers' compensation coverage. That protects you if something goes wrong on the job, and it means our crew is covered while they are on your roof. We are happy to provide proof of insurance before we start.
What should I do each year to keep a metal roof in good shape around here?
The main thing in this climate is fasteners. Hot summers and wind work screws loose over time, and a loose screw is where leaks start. Have the roof inspected once a year, especially after spring and fall storm season, and after any big hail event. Keep limbs cut back from the roof, clear debris from valleys and gutters, and check flashing around chimneys and skylights. A small screw replacement now is a lot cheaper than a leak repair later.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm