Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Meridianville, AL (35759) · Local Professionals

Huntsville Metal Roofing · Fast response in Meridianville and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Meridianville is the kind of place where brick ranches sit on big lots off Highway 231 and new subdivisions keep pushing north toward the Tennessee line. If you live out here in 35759, you know the look: one-story brick homes from the 70s and 80s, newer two-story subdivisions with architectural shingles, and a few barns and shops on the old cotton land. When the wind rips through the valley or a hailstorm rolls in from the west, roofs take a beating.

That is why homeowners in Meridianville call Huntsville Metal Roofing. We are based just down the road in Huntsville, and we know the housing stock here. Whether you are in a brick ranch off Bob Wade Lane or a newer build near Meridianville Middle School, we can tell you straight what your roof needs and what it will cost.

Metal Roofing in Meridianville (35759)

Meridianville sits on rolling ground with red clay and limestone underfoot. A lot of the older brick ranches have shallow roof pitches and wide eaves, which can mean poor attic ventilation and heat buildup in July. The newer subdivisions often have steep hips and gables with architectural shingles that are now hitting the 20-year mark. We see a lot of wind-lifted shingles and failed pipe boots after spring storms. The soil here also moves with wet and dry cycles, so we pay close attention to flashing at chimneys and skylights, and we check that downspouts are moving water away from the foundation. On the bigger lots, we have room to stage materials, but some of the tighter streets near the older neighborhoods require careful planning for delivery and cleanup.

Our team has worked on everything from corrugated panel on a shop off Steger Road to standing seam on a new build near Flint River. We know the local suppliers, the inspection rhythms, and the weather patterns that affect roofs here.

Our services in Meridianville

How a Job Works in Meridianville

Step 1: You call us at (256) 858-7133 or request a free estimate online. We set up a time to walk your roof and look at the attic if needed. We check for soft spots, rust, loose fasteners, and flashing issues, and we give you a written scope and price before any work starts.

Step 2: Once you approve, we pull the permit if required by the city or county and schedule the work. For a metal roof over shingles, we verify that your existing roof has only one layer and that the decking is sound. On tighter lots in older Meridianville neighborhoods, we plan material drops so we do not block driveways or mailboxes. If you are in an HOA, we can provide color samples and documentation for approval before we order panels.

Step 3: After the install, we magnet-sweep the yard and driveway for nails, haul away old materials, and walk the job with you. We do not consider the job done until you have looked it over and signed off.

Metal roofing in Meridianville runs from about $5.50 per square foot for corrugated panel to $20 per square foot for copper or specialty metal. A typical brick ranch might need 1,800 to 2,200 square feet of roofing, so a metal roof over shingles could land in the $12,000 to $16,000 range, while a standing seam replacement might be $20,000 to $28,000. Repairs start at $450 for leak fixes, and screw replacement or re-fastening starts at $750. The final price depends on roof size, pitch, access, the condition of the decking, and how quickly you need it done. We give free estimates and explain every line item. Call (256) 858-7133 to get started.

My brick ranch off Bob Wade Lane has original shingles from the 1980s. Can you put metal over them?
Possibly. Alabama code allows a metal roof over one layer of existing shingles if the decking is solid and the fasteners will hold. We inspect the attic and decking first. If there are soft spots or multiple layers, we recommend a full tear-off. We will tell you honestly which option makes sense for your home.
A storm just peeled back some panels on my shop near Steger Road. How fast can you get out?
We prioritize storm damage calls. Call (256) 858-7133 and we will schedule a free inspection, usually within a day or two, and often same-day for active leaks. We can tarp or secure the area to prevent further damage and provide a written estimate for the repair.
What does a metal roof cost for a typical three-bedroom ranch in Meridianville?
For a 1,800 to 2,200 square foot ranch, metal roof over shingles starts around $7 per square foot, so roughly $12,600 to $15,400. Standing seam starts at $10 per square foot, so $18,000 to $22,000. These are ballpark figures. Size, pitch, and condition of the decking affect the final price. We give free written estimates.
Do I need a permit for a metal roof in Meridianville, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Madison County. The rules and fees vary, so we confirm with the local building department before we start. We can pull the permit for you and schedule the required inspections. For unincorporated areas, the county handles it; inside city limits, it is the city. We will verify the exact requirements for your address.
My neighbor says my new metal roof will send water onto their property. What are the rules?
Alabama follows the reasonable use rule for drainage, but you should not intentionally channel water onto a neighbor's land. We design gutters and downspouts to discharge on your own property, and we can adjust the layout to avoid conflicts. If you are in an HOA, check the covenants for any rules about roof color or style before we order materials.
Are you insured for work on my Meridianville home?
Yes. We carry general liability insurance and workers' compensation coverage. If a worker is injured on your property, workers' comp covers it, and general liability protects your home if something goes wrong.
What should I do to maintain my metal roof in Meridianville between storms?
Check for loose or missing screws after high winds, keep gutters clear of pine needles and leaves, and look for rust or bubbling paint on panels. We recommend a professional inspection every two to three years, especially on older roofs. We offer free estimates for inspections and can replace screws and re-seal flashing before small issues become leaks.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm