Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Triana, AL (35775) · Local Professionals

Huntsville Metal Roofing · Fast response in Triana and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Triana is a small town with a big riverfront, where lots are often a half acre or more and the houses range from older farmhouses to brick ranches built when the space program was booming. If you live along Zierdt Road or down near the Tennessee River, you know that spring storms and summer sun take a toll on asphalt shingles.

That is why more homeowners in Triana (35775) are calling Huntsville Metal Roofing. We are based just up the road in Huntsville, and we know the kinds of roofs that work here: metal over shingles on older homes, repairs after wind or hail, and new standing seam on places with a view of the river.

Metal Roofing in Triana (35775)

Triana is a mix of old and new. You have small farmhouses on large lots, brick ranches from the 1960s and 70s, and some newer homes tucked off the main roads. The ground is red clay and limestone, and drainage can be tricky on sloped lots. Many properties have mature oaks and pines that drop limbs and fill gutters. The Tennessee River is close, so humidity is high and afternoon thunderstorms are common in summer. That means fasteners back out, seams separate, and shingles lift. We see a lot of wind damage after spring storms, and hail can bruise asphalt shingles. For older homes, a metal roof over shingles (retrofit) is often the most practical choice because it avoids a tear-off and saves money. For barns and shops, corrugated or ribbed panels are popular. Standing seam is growing on homes that want a clean look and long life.

Our team has worked in Triana and around Madison County for years. We understand the local building department requirements and can help you navigate permits. We are fully insured with general liability and workers' compensation, so you are protected.

Our services in Triana

How a Job Works in Triana

Step 1: You call us at (256) 858-7133 or request a free estimate online. We schedule a time to come out and inspect your roof. We look at the condition of your current roof, check for leaks, and talk with you about what you want. We give you a written estimate with options.

Step 2: Once you approve, we pull the permit if needed and schedule the work. In Triana, many lots are large, but some older properties have tight driveways or overhanging trees. We plan for that. If you live in a neighborhood with an HOA, we can provide the paperwork they need for approval. We also coordinate with your insurance company if it is a storm damage claim.

Step 3: When the job is done, we clean up thoroughly. We use magnets to pick up nails and walk the property with you to make sure you are satisfied. We do not leave until you are happy.

Prices for metal roofing in Triana depend on the size of your roof, the material, and how complex the job is. For a typical ranch home, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. If you are replacing an existing roof, that starts at $9 per square foot. A metal roof over shingles (retrofit) starts at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750. Corrugated and ribbed panel roofing starts at $5.50 per square foot, and stone-coated steel or metal shingles start at $9 per square foot. Copper and specialty metal start at $20 per square foot. We also offer coating and painting from $2.50 per square foot, and gutters from $9 per linear foot. The best way to get an accurate price is to call us at (256) 858-7133 for a free estimate. We will come out, measure, and give you a clear number.

My house is on a large lot off Zierdt Road with several big oaks. Is a metal roof over shingles a good idea here?
Yes, it can be. A retrofit over your existing shingles saves you the cost of tear-off and disposal, and it adds a layer of protection. But we first check that your roof structure can handle the extra weight and that your existing shingles are in good enough shape. With oak limbs overhead, we also recommend trimming back branches and keeping gutters clean to prevent debris buildup. We can inspect your roof and tell you if a retrofit is right for your home.
A storm just blew through Triana and lifted some panels on my barn. Can you repair it quickly?
Yes. We handle storm and wind damage repair, and we offer free inspections for storm damage. Call us at (256) 858-7133 and we will schedule a visit as soon as possible. We can secure the roof to prevent further damage and give you an estimate for the repair. If it is an insurance claim, we can document the damage for you.
What does a metal roof cost for a typical Triana home?
For a standard ranch-style home, most metal roof installations start around $8 to $10 per square foot, depending on the material. A retrofit over shingles starts at $7 per square foot. Smaller repairs start at $450. The exact price depends on the size and pitch of your roof, the number of penetrations, and the material you choose. We give free estimates, so call (256) 858-7133 to get a number for your specific home.
Do I need a permit for a metal roof in Triana?
In most cases, yes. Madison County and the City of Triana require permits for roof replacements and some repairs. The rules can vary, so we always check with the local building department before starting work. We handle the permitting process for you to make sure everything is done correctly.
My neighbor's trees hang over my property line. Can I trim them to protect my roof?
In Alabama, you generally have the right to trim branches that overhang your property line, but you should not damage the tree or trespass on your neighbor's property. It is best to talk with your neighbor first. If you are in an HOA, check the rules about tree maintenance. We can advise you on how branches might affect your roof, but we do not handle tree removal.
Are you insured for work on my property?
Yes, we are fully insured. We carry general liability insurance and workers' compensation coverage for our crew. That means you are protected if anything goes wrong on the job.
What should I do to maintain my metal roof in Triana's humid climate?
Check your roof after major storms for loose fasteners or damaged panels. Keep gutters and downspouts clear of leaves and debris, especially if you have oak or pine trees nearby. Twice a year, look for signs of rust or corrosion, particularly on cut edges or around fasteners. If you see anything that concerns you, call us for a free inspection. We can also apply a protective coating to extend the life of your roof.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm