Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Decatur, AL (35601) · Local Professionals

Huntsville Metal Roofing · Fast response in Decatur and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Decatur sits right on the Tennessee River, and the weather that rolls through here hits roofs hard. From the historic Victorians near Old Town to the brick ranches off Beltline Road and the industrial lots along the river, every roof takes a beating from spring storms and summer sun. If you live in 35601, you know the drill: one minute it's calm, the next the wind is peeling shingles off your neighbor's house.

That's why homeowners and property managers in Decatur call Huntsville Metal Roofing. We're based in Huntsville, just a short drive up I-565, and we've worked on everything from riverfront homes to farm shops out toward Priceville. When a storm rolls through and you're staring at a leak, we're the team that shows up, figures out what's wrong, and fixes it right.

Metal Roofing in Decatur (35601)

Decatur is a river city, and that shapes the work. The older Victorians and Craftsman bungalows in neighborhoods like Old Decatur and Albany have steep, complex rooflines with original details that need careful flashing and custom metal work. The brick ranches and split-levels from the 1960s and 70s, especially on the south and west sides, often have low-slope sections and wide eaves that can trap water if the metal isn't installed with the right underlayment and ventilation. And then there are the commercial and agricultural buildings near the river and out toward the county line: big, open spans that need standing seam or R-panel systems built for wind uplift and heavy rain.

Our team has been serving Decatur and the surrounding areas for years. We know how the Tennessee River humidity affects fasteners, how summer UV fades cheap coatings, and how a straight-line wind event can lift panels on a barn off Highway 20. We also know the local building department and what it takes to get a permit pulled and inspected without slowing down your project.

Our services in Decatur

How a Job Works in Decatur

Step 1: It starts with a call to (256) 858-7133 or a request through our site. We'll set up a free on-site assessment at your property in Decatur. We look at the roof, the attic if accessible, the flashing, and the gutters, and we talk through what you're seeing and what you want. You get a written estimate with options, not a high-pressure sales pitch.

Step 2: Once you approve, we schedule the work. In Decatur, that might mean coordinating with the city for a permit, working around tight driveway access in older neighborhoods, or matching a panel profile that fits your HOA's design rules. Our crew handles the tear-off, installation, and any structural repairs, and we keep you posted on progress each day.

Step 3: We finish with a full cleanup, magnet sweep for nails, and a walkthrough with you. We don't leave until you're satisfied and we've shown you exactly what we did and how to maintain it.

Pricing in Decatur depends on the size and pitch of your roof, how many layers you're removing, access, and the condition of the decking. For a typical ranch or bungalow in 35601, metal roof replacement starts around $9 per square foot, and standing seam runs from $10 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs, like fixing a leak or replacing failed fasteners, start at $450 and $750 respectively. Commercial and agricultural jobs are quoted per project after a free estimate. We give you a clear number before we start, and we stick to it. Call (256) 858-7133 to get your free estimate.

My Victorian in Old Decatur has a complicated roofline with original dormers. Can you match the metal work to the house?
Yes. Older homes in Old Decatur and Albany often have multiple pitches, dormers, and decorative trim that require custom flashing and panel layout. We take measurements and fabricate pieces to fit, and we can suggest profiles that look appropriate for the period without compromising weathertightness.
A storm just took off some panels on my barn off Highway 20. How fast can you get out there?
We prioritize storm damage calls. Call (256) 858-7133 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area to prevent further damage and give you a repair estimate on the spot.
What's a realistic budget for replacing the roof on a 1,800-square-foot brick ranch in Decatur?
For a typical ranch that size, metal roof replacement starts around $9 per square foot, so you're looking at roughly $16,000 to $20,000 depending on pitch, access, and whether we're removing existing shingles. Standing seam would be higher. We'll give you an exact quote after a free inspection.
Do I need a permit to replace my roof in Decatur, and who handles it?
Most full roof replacements in Decatur require a permit from the city's building department. Requirements can vary based on the scope and the age of the home. We handle the permit application and coordinate inspections so you don't have to worry about it.
My HOA has rules about roof colors. Can you help me get approval?
Yes. We can provide color samples and specification sheets for your HOA's architectural review. We're familiar with common HOA requirements in the area and can suggest panel profiles and colors that meet the rules while still giving you a durable metal roof.
Are you fully insured for work at my Decatur property?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What should I do to maintain my metal roof in Decatur's humid summers?
Check fasteners annually for tightness, especially after severe storms, and keep gutters clear of debris from the oaks and pines common here. A periodic coating can extend the life of painted panels. We offer inspections and maintenance plans to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm