Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Somerville, AL (35670) · Local Professionals

Huntsville Metal Roofing · Fast response in Somerville and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Somerville is a small town where the lots are wide, the driveways are long, and a lot of us live on acreage that has been in the family for generations. The housing stock runs from older farmhouses and brick ranches to metal barns and shops out on the back forty, and the roofs take a beating from summer sun, spring hail, and the occasional ice storm that rolls through Morgan County.

When folks in 35670 need a metal roof that will outlast the weather and the wear, they call Huntsville Metal Roofing. We know the roads out here, from the square in Somerville to the cotton fields toward Falkville, and we have worked on everything from a leaky porch roof on a country home to a full standing seam retrofit on a commercial shop.

Metal Roofing in Somerville (35670)

Somerville sits in the rolling farmland of Morgan County, where the ground is a mix of red clay and limestone and the lots are often measured in acres rather than feet. That means we see a lot of detached shops, barns, and agricultural buildings with corrugated or R-panel roofs that need repair or replacement after years of sun and storm. On the residential side, many homes are single-story brick ranches or older farmhouses with steep gable roofs, and the tree canopy of oaks, hickories, and pines means debris and shade can speed up wear on fasteners and seams. Drainage matters too: with heavy summer downpours, a roof that does not shed water quickly can send it right back toward the foundation.

Our team has been working in and around Huntsville and Madison County for years, and we have seen how the Tennessee Valley climate affects metal roofs. We know that the same storm that dumps rain on Huntsville can drop hail on Somerville, and we plan every job with that in mind.

Our services in Somerville

How a Job Works in Somerville

Step 1: You call us at (256) 858-7133 or request a free estimate online. We schedule a time to come out to your property in Somerville, walk the roof, and take measurements. We will look at the existing roof, check the flashing and fasteners, and talk with you about what you want: a repair, a replacement, or a new metal roof over your current shingles.

Step 2: Once you approve the estimate, we pull the permits required by the local building department (rules vary by jurisdiction, so we confirm everything before we start). On rural lots, access is usually easy, but we plan for tight spots around barns and shops. We protect your landscaping and keep the work area organized. Our crew installs the new metal roof, whether it is standing seam, corrugated panels, or stone-coated steel, and we make sure every flashing detail is sealed tight.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails and debris, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and the roof is ready for the next storm.

Pricing for metal roofing in Somerville depends on the size and pitch of your roof, the material you choose, and how accessible the site is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you want to go over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. For agricultural or commercial buildings, we provide a free estimate based on the scope. The best way to get an accurate number is to call us at (256) 858-7133 for a free on-site assessment.

My barn off Highway 36 has corrugated panels that are rusting and leaking. Can you repair it or do I need a full replacement?
We see a lot of older corrugated barns in the Somerville area. In many cases, we can replace rusted screws, re-fasten panels, and seal leaks for a fraction of the cost of a new roof. If the rust has thinned the metal or the panels are dented and failing, we will let you know honestly whether a repair or a replacement makes more sense. We offer free inspections so you can decide with confidence.
A storm just blew through and lifted some panels on my roof. How fast can you get out to Somerville?
We prioritize storm damage calls in Somerville and the surrounding areas. Call us at (256) 858-7133 and we will schedule an inspection as soon as possible, often the same day or the next. We can tarp or secure the roof to prevent further damage and then give you a written estimate for the repair.
What does a typical metal roof repair cost in Somerville?
Most repair jobs in Somerville start around $450 for leak fixes and minor flashing work. Screw replacement and re-fastening starts at $750, and larger repairs like chimney flashing or skylight repairs start at $600. The final price depends on the extent of the damage, roof access, and materials needed. We always provide a clear estimate before we start.
Do I need a permit to replace my roof in Somerville?
Roofing permits are commonly required for a full replacement or re-roof in Somerville, and the requirements are set by the local building department. We handle the permit application and inspections for you, and we make sure the work meets current codes, including limits on how many layers of shingles you can recover over.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter and downspout placement to direct water away from the property line. If you are in an HOA, we can also help you coordinate the design review for panel profile and color. Just let us know about any property line concerns during the estimate, and we will plan accordingly.
Are you fully insured for work on my Somerville property?
Yes, Huntsville Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Somerville's climate?
In our area, the main things to check are fasteners, seals around flashing, and debris buildup in valleys and gutters. We recommend a professional inspection every couple of years, especially after hail or high winds. Keeping the roof clean and replacing worn screws early can add years to its life.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm