Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in New Market, AL (35761) · Local Professionals

Huntsville Metal Roofing · Fast response in New Market and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

New Market is where the Tennessee line gets quiet, and the roofs have to handle real weather. Most homes here sit on generous lots off Winchester Road or near the Flint River, with a mix of older farmhouses, brick ranches, and newer builds tucked between soybean fields and wooded ridges. If your roof is showing its age, we can tell you straight what it needs.

Huntsville Metal Roofing is based just down the road in Huntsville, and we know the 35761 area well. From the older barns and shops that need corrugated panel work to the brick homes that would look sharp with standing seam, we bring the right materials and the right approach for New Market properties.

Metal Roofing in New Market (35761)

New Market sits in the rolling farmland and wooded edges of Madison County, and the ground here can be deceptive. Red clay holds water after a heavy rain, and on sloped lots near the river bottoms, that means drainage and grading matter as much as the roof itself. Many properties have long driveways and tight spots for equipment, so we plan access before we ever pull up. Older farm structures often have corrugated or ribbed panels that have seen decades of sun and storms, and those roofs need a different touch than a newer brick ranch with architectural shingles. We also see a lot of mature oaks and pines close to the house, which means debris, shade, and the occasional fallen limb are part of the conversation.

Our team has worked across Huntsville and the surrounding communities, including New Market, Hazel Green, and Meridianville. We understand the local building stock, from the 1950s and 60s brick ranches to the newer subdivisions, and we know how to match a metal roof system to the structure underneath. Whether it is a retrofit over existing shingles or a full tear-off, we handle the details that keep a roof tight in north Alabama weather.

Our services in New Market

How a Job Works in New Market

Step 1: You call us at (256) 858-7133, and we set up a free on-site assessment. We walk the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a clear written estimate with options, no pressure and no surprises.

Step 2: Once you approve, we schedule the work and handle the permit coordination with the local building department. In New Market, that often means planning around rural access and making sure materials are staged efficiently. If your property has a steep drive or limited turnaround, we bring the right equipment and protect the landscaping. For barns and shops, we often recommend corrugated or ribbed panel roofing because it handles wide spans and open framing well.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We do not leave until the site is clean and you know exactly what was done.

Pricing for metal roofing in New Market depends on the scope and the material. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8 per square foot, and standing seam around $10 per square foot. A metal roof over existing shingles (retrofit) starts near $7 per square foot, and full replacement around $9 per square foot. Smaller repairs, like leak fixes or flashing work, start around $450, while screw replacement and re-fastening starts around $750. Coating and painting can start around $2.50 per square foot. The biggest cost factors are roof size, accessibility, the condition of the existing roof, and how soon you need it done. Call (256) 858-7133 for a free estimate tailored to your property.

My barn off Winchester Road has old corrugated panels that are rusting through. Can you match the existing profile and color?
Yes. We work with corrugated and ribbed panel profiles common on New Market farm buildings, and we can often match or closely coordinate the color. We will assess the framing and fasteners first, because on older barns the panels are only part of the story. If the purlins are sound, a retrofit or panel replacement can be straightforward.
A storm just took down a limb on my roof near the Flint River. How fast can you get out for an emergency repair?
We prioritize storm and wind damage calls in the New Market area. Call us at (256) 858-7133, and we will schedule the soonest available inspection, often same or next day depending on volume. We can tarp or stabilize the roof if needed and give you a clear repair plan.
What does a typical metal roof cost for a 1,500 square foot ranch in New Market?
For a ranch that size, a corrugated panel roof might start around $8,000 to $10,000, while standing seam could run $15,000 or more. These are ballpark figures. Access, roof pitch, and whether we are going over shingles or tearing off all affect the final number. We give you a firm written estimate after seeing the roof.
Do I need a permit to replace my roof in New Market, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Madison County, and the rules can vary. We coordinate with the local building department to confirm what is needed for your address and handle the paperwork as part of the job. You do not have to navigate that yourself.
My neighbor says my new metal roof cannot extend past the property line, and my HOA has color rules. Can you help with that?
Yes. We are familiar with property line setbacks and HOA design review in the area. We can provide color samples and product specs for HOA approval, and we always build to local setback requirements. If there is a question about the property line, we recommend a survey, but we will work with you to keep the installation compliant.
Are you insured for work on my New Market property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in New Market to handle the summer heat and storms?
In our climate, the main things are keeping debris off the roof, checking fasteners after severe storms, and making sure gutters and flashing stay clear. We recommend an inspection after major wind or hail events. A coating can also extend the life of older panels and help with UV and rust. We can set up a maintenance plan if you want.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm