Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Madison, AL (35758) · Local Professionals

Huntsville Metal Roofing · Fast response in Madison and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Madison's brick-front two-story subdivisions are hitting that first big hail-worn shingle replacement, and a lot of homeowners here are done patching asphalt and ready for something that lasts. From the older lots near downtown Madison to the newer builds out toward County Line Road and the Target shopping area, the housing stock tells the story: 1990s and 2000s architectural shingles now showing granule loss, storm creases, and lifted tabs after another round of Tennessee Valley thunderstorms.

We're Huntsville Metal Roofing, based just down the road, and we work Madison (35758) every week. Whether you're in a subdivision off Hughes Road or a larger lot near Palmer Park, you've probably seen the same thing we have: shingles that looked fine at year ten and are failing at year twenty. Metal shingle roofing and storm and wind damage repair are two of our most requested services here, and we handle both with the same crew that's been on roofs across Madison County for years.

Metal Roofing in Madison (35758)

Madison sits on the edge of the Tennessee Valley, with red clay and limestone soil that drains slowly after a heavy summer downpour. That matters for roofing because proper flashing, gutter sizing, and panel pitch all have to account for fast water. Most Madison subdivisions have tight side yards and steep hip-and-gable roofs, so staging panels and getting a clean install without tearing up landscaping takes planning. We see a lot of two-story brick homes with complex roof lines, which means more valleys, more transitions, and more chances for leaks if the detailing isn't right. Older properties closer to downtown Madison sometimes have shallower pitches or layered shingles that need a careful tear-off before any metal goes down.

Our team has worked on everything from simple ribbed panel roofs on detached shops to standing seam and stone-coated steel on primary homes. We know the local building department's inspection rhythm and what Madison homeowners expect for cleanup and communication. If you're near the Madison City Schools campus or the Dublin Park area, we've likely been on your street.

Our services in Madison

How a Job Works in Madison

Step 1: You call (256) 858-7133 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic and flashing details, and give you a written scope with pricing. No pressure, no vague numbers.

Step 2: Once you approve, we pull the required roofing permit through the City of Madison and coordinate any HOA design review if your subdivision requires it. On install day, our crew protects landscaping, stages materials in the driveway or street according to Madison's rules, and works around your schedule. Tight lots near Wall Triana Highway or older streets off Main Street sometimes need extra care with panel delivery, and we plan for that up front.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. You get a clear explanation of what was done, warranty paperwork, and our contact info for any follow-up. We leave your property clean and your roof ready for the next storm season.

Pricing in Madison depends on roof size, pitch, access, and whether we're doing a repair or a full replacement. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and metal roof over shingles (retrofit) around $7. Metal shingle and stone-coated steel both start around $9 per square foot, which is common for Madison's brick two-story homes. Repairs and leak repairs start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs run about $9 per linear foot. Storm and wind damage inspections are free. Call (256) 858-7133 for a free estimate tailored to your Madison property.

My two-story brick home in a Madison subdivision off Hughes Road still has the original 1990s shingles. Is metal shingle roofing a good fit?
Yes, and it's one of the most common upgrades we do in Madison. Metal shingle roofing starts around $9 per square foot and gives you the look of architectural shingle with a much longer lifespan, which suits the brick-front two-story homes in subdivisions like the ones off Hughes Road and County Line Road. We check your roof pitch, decking condition, and flashing details first, then recommend the profile that matches your HOA's design rules.
A storm just peeled back some panels on my roof near Palmer Park. How fast can you get out for storm and wind damage repair in Madison?
We prioritize active leaks and storm damage in Madison and the surrounding Huntsville area. Call (256) 858-7133 and we'll schedule a free inspection, usually within a day or two depending on storm volume. We document the damage for your insurance claim, make temporary repairs if needed, and give you a written repair or replacement estimate. We never promise coverage, but we do give you the paperwork your adjuster needs.
What does a typical metal roof replacement cost for a Madison home in 35758?
Most full metal roof replacements in Madison start around $9 per square foot, with standing seam around $10 and metal shingle or stone-coated steel around $9. A typical 2,000 to 2,500 square foot roof often lands in the mid-five figures before options like snow guards or upgraded gutters. Size, pitch, number of valleys, and whether we tear off existing layers all affect the final number. We give you a written estimate after a free on-site assessment.
Do I need a permit for a metal roof replacement in Madison, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Madison, and thresholds and inspection requirements can vary. We pull the permit and coordinate inspections as part of the job. For the most current rules, check the City of Madison website or call the building department directly before you start. We'll walk you through what applies to your address.
My HOA requires architectural approval and my neighbor says my new metal roof will change the look of the street. How do you handle that?
We work with Madison HOAs regularly and can provide color samples, panel profiles, and manufacturer spec sheets for your architectural review. Property line rules in Alabama generally let you build on your own lot, but HOA covenants can be stricter than city code. We recommend getting written HOA approval before ordering materials, and we'll coordinate the paperwork so your install doesn't get delayed.
Are you fully insured for work on my Madison property, and what does that cover?
Yes. We carry general liability insurance and workers' compensation coverage for our crew. That means if someone gets hurt on your property or something gets damaged during the job, you're not exposed. We're happy to provide a certificate of insurance before we start, and we recommend asking any contractor for the same before they set foot on your roof.
What maintenance should Madison homeowners do between storms to keep a metal roof in good shape?
Check your gutters after the spring and fall storm seasons, since heavy summer downpours and fall leaf drop can clog them fast. Look for loose fasteners or lifted panels after any hail or straight-line wind event, and keep tree limbs off the roof, especially if you have oaks or pines near the house. A quick annual inspection, which we offer free, catches small flashing issues before they become leaks. Ice damming is rare here, but the occasional winter ice storm can back water up at the eaves, so keep an eye on that too.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm