Serving the Huntsville area  ·  (256) 858-7133  ·  Open Mon-Sun 7am-7pm
📞 (256) 858-7133 Free Quote

Metal Roofing in Hartselle, AL (35640) · Local Professionals

Huntsville Metal Roofing · Fast response in Hartselle and the Huntsville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+306Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hartselle is a town where a lot of the roofs are older than the people living under them. The brick ranches and two-stories around downtown and the older blocks off Main Street have been through decades of Alabama heat, spring hail, and the occasional ice storm, and a fair number of them are still wearing the original asphalt shingles. If your roof is at that point, metal is worth a serious look, and we can tell you straight whether an overlay or a full tear-off makes more sense on your house.

Homeowners in Hartselle (35640) call Huntsville Metal Roofing because we know this town, not just the interstate exit. We have worked on standing seam over the older brick homes near the depot district and on metal shingle roofs in the newer subdivisions out toward Highway 31. If you are near Hartselle High School or the historic downtown square, we have probably already been on your street.

Metal Roofing in Hartselle (35640)

Hartselle sits in Morgan County, and the ground here is a mix of red clay and limestone that holds water after a heavy summer storm. On the older lots downtown and around the historic district, the houses are close together and the roof pitches are steep, which means access is tight and we often have to hand-carry panels or stage a dumpster carefully so we do not tear up a driveway or a neighbor's fence. Out toward the newer subdivisions off Highway 31 and the roads leading to Danville, the lots are wider and the roofs are simpler, but the sun hits them hard all afternoon and the shingles take a beating. We see a lot of wind-lifted panels and failed fasteners after a spring squall line, and on the older brick homes we frequently find flashing gaps at chimneys and porch roofs where the original work was not done right.

Our team has been working roofs in the Tennessee Valley for years, and we understand how Hartselle's mix of old and new housing stock changes the job. We know when a standing seam profile will look right on a 1950s ranch and when a metal shingle or stone-coated steel is a better match for a newer two-story. We also know the local building department and what they look for on a re-roof, so the inspection does not turn into a surprise.

Our services in Hartselle

How a Job Works in Hartselle

Step 1: You call us at (256) 858-7133 or request a free estimate online. We schedule a time to come out and look at your roof, whether you are in a older home near downtown or a newer place out on the west side. We get up on the roof, check the decking, flashing, and fasteners, and talk with you about what we find. You get a written estimate with options, not a pressure pitch.

Step 2: Once you approve the scope, we pull the permit if one is required and schedule the work. In Hartselle, that often means coordinating with the city building department and, in some neighborhoods, an HOA design review before we order panels. On tight downtown lots, we plan where the truck and dumpster go so we do not block the alley or a neighbor's drive. We protect your landscaping and keep the work area contained.

Step 3: When the job is done, we clean up. That means magnet-sweeping the yard and driveway for nails, hauling off all old materials, and walking the roof with you to show you the finished work. We do not leave until you are satisfied and the site is as clean as we found it.

Pricing in Hartselle depends on the size and pitch of your roof, how many layers of old shingles are up there, and how easy it is to get materials to the roof. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from about $10 per square foot, and a metal roof over existing shingles (retrofit) starts around $7 per square foot. If you just need a repair, metal roof repair and leak repair start at $450, and screw replacement or re-fastening starts at $750. A full replacement typically starts around $9 per square foot, and corrugated or ribbed panel roofing starts at $5.50 per square foot. These are starting figures, not a quote. Call us at (256) 858-7133 for a free estimate on your specific roof.

My house is a 1960s brick ranch near downtown Hartselle with the original shingles. Can you put metal over them or do I need a tear-off?
It depends on how many layers are already there and what the decking looks like underneath. Alabama code limits how many layers you can have, and on a lot of these older ranches we find soft spots or failed flashing that need to be addressed. We will get up there, check the deck, and tell you honestly whether an overlay is allowed and sensible or whether a tear-off is the better long-term call.
A storm just took some shingles off my roof in Hartselle. How fast can you get out to look at it?
We offer free storm and wind damage inspections in Hartselle and the surrounding area. Call us at (256) 858-7133 and we will schedule the soonest available slot, usually within a day or two after a major storm. If there is an active leak, we can often get a temporary fix in place while you wait for the permanent repair.
What does a typical metal roof cost for a 1,500 square foot house in Hartselle?
For a house that size, a basic corrugated or ribbed panel roof might start around $5.50 to $8 per square foot installed, while standing seam would run higher, from about $10 per square foot. The exact number depends on roof pitch, number of penetrations, and whether we are going over old shingles or tearing off. We give free written estimates so you can see the real number for your roof.
Do I need a permit to re-roof my house in Hartselle, and who handles that?
In most cases, yes, a roofing permit is required for a full replacement or re-roof in Hartselle. The city building department sets the rules and fees, and they can vary. We handle the permit application and coordinate the inspection as part of the job, so you do not have to chase it down.
My neighbor's tree limbs hang over my roof and I am worried about the property line. What can I do?
Property line issues are common in older Hartselle neighborhoods with mature trees. You have the right to trim branches that cross onto your property, but it is always best to talk with your neighbor first. If your HOA has rules about tree maintenance or roof color, we can help you understand what needs approval before we order materials.
Are you fully insured for work on my Hartselle property?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What maintenance does a metal roof need in Hartselle's climate?
Metal roofs hold up well here, but the summer UV and spring storms do take a toll. We recommend an annual inspection, especially after hail or high wind, to check fasteners, seals, and flashing. Keeping gutters clear and trimming back overhanging limbs from your oaks and pines will also help prevent problems. A coating every several years can extend the life of the finish.
Why choose us?

Trusted professionals in Huntsville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Huntsville

All your work handled by qualified professionals in Huntsville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

306+ Verified Client Reviews in Huntsville

⭐⭐⭐⭐⭐ 4.9/5 · 306 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Huntsville · Response within 24h · No commitment · ☎ (256) 858-7133

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Huntsville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm